Best Cake Organizer Cabinet

Organizer 9 Aug 2022 10+ Comments Open

1. YouCopia 50109 StoreMore Adjustable Organizer

YouCopia 50109 StoreMore Adjustable Organizer

Vdomus customer service will provide friendly and easy-to-reach support if you have any problems with their products. The cutting boards and pot lids are not included in the lower cabinet. It's easy to find and remove one thing at a time with the 6 dividers that you can adjust to fit your items. Steel wires and vertical storage protect cookware from chips and scratches. The pan organizers are held firmly in place by the soft non-slip feet. Measures 9-1/4" Made from durable plastic and steel wires, the wipes have a damp cloth Imported white

Brand: Youcopia

👤This was one of the best purchases I've ever made. It's easy to set up and it's flexible enough to fit in almost any cabinet. There is a half shelf in the back of the cabinet. I was able to put a few 10" pans, one12" pan, one pot and a couple of lids in this device with handles going up and back so I can take anything out and put it back without touching anything else. You can use trial and error to arrive at the best arrangement. What a great design!

👤It does the job and is nicer than a lot of the other racks. It has rubber feet so it doesn't slide around. There are two baking sheets in it. The metal divider wires are shaped so that they clip into the base slots, which is fine on the thicker end of the holder. On the side you pull out to expand the rack, the ends of the wire dividers stick out of the bottom of the shelf, scratching it. The problem was solved by adding two thin cork feet to the existing feet on the thinner end. They need to shorten the wire ends.

👤This is a rack that I love. A back saver. If my cast iron is in it, I have all. The fact that you can adjust the length of the dividers to fit your cabinet is even better. If you are familiar with cast iron, you know how heavy the pans are to lift to get to the different pans. They just slide in and out of the rack. If this works for my cast iron, it will work for any other pans. This rack is very good.

👤It is amazing. I have been living without this item for a long time. It was easy to put together, but it took a little time to figure out the right spacing for my needs. The quality is great, even the bumpers on the bottom are excellent. I bought the expanding one and the "XL" and they are both excellent. I used the expanding one for my pots and pans, and I'm so happy that I did that. I have to teach my husband how to keep it organized. It's funny. Highly recommended!

👤I love everything about these! They fit in our cupboards and are easy to setup in our kitchen.

👤It's a perfect solution to organize my pans. It's easy to assemble and adjust the dividers to fit my needs. I searched for the right one and found it. There is a stain on the surface which I couldn't wipe off, which is the only reason for the 4 star rating.

👤This was a great investment. It made my lids much easier to reach. It gave me more room in other cupboards to store things since it held more items than I could previously store in this space. It took just a few minutes to put everything in place, mostly because I had to decide what to put in my cupboard. I didn't even look at the instructions, you just pull the expander as big as you need it, then squeeze the dividers to slide the ends into the slots. I am sure I will get used to it since the shelf is a drawer. The space needed to store the lids is not enough. I had to put a divider in the front so the first lid doesn't fall out when I grab it. I am using it for pots, casserole dishes, and trivets. I didn't know where to put my extra three dividers, so they are in the last three holes.

2. Honey Can Do Rolling Storage Organizer Plastic

Honey Can Do Rolling Storage Organizer Plastic

When adding new wipes to the warm wipe glow warmer, make sure to pour half a cup of water over the wipes. During periods of non-use, the unit should be unplugged. It's ideal for home, classroom, crafts or art studios. Large storage drawers that are semi- transparent for easy viewing. When needed, locking wheels provide stability. Can be used as an additional workspace. Assembly tools and instructions are included. The product is 25”W x 32”H and the drawer is 11 W x 5.5 H. Small-11 W x 2.75 H x 15 D inches. The drawer is about 12 feet in diameter and has depths of 2.6 and 5.1 feet.

Brand: Honey-can-do

👤The quality of the cart is what I expected. I sliced my knuckle open about two seconds into putting it together. That is not acceptable. The edges of the slides were left with a raw edge from manufacturing. That is lazy and negligent. It could hurt a child. I'm changing my rating to a 1 star. The plastic drawers on one side of the cart are too small for the track. I wish I'd noticed that I could return the dumb thing for a refund. I'm not happy with this thing.

👤I was hesitant to purchase this unit because of the reviews about the difficulties in assembling, broken drawers and inability to open-close drawers. It's sharp enough to shave plastic from drawers. I just put this thing together and haven't loaded anything yet. That's it: 1. The assembly took 35 minutes to finish. 2. The Allen wrench was enough to assemble the main frame. 3. Without a screwdriver, straight head screws can be tightened. The screwdriver was not supplied with the kit. I didn't need one to secure drawer knobs. 4. Make sure to wash the inside of the two outer frame pieces during the main frame assembly. They are shown in the diagram. The sides are too close together and it will be hard to push in and out. I think some people didn't install the washers correctly. As you install the screws, do not tighten them. Before you install the framing screws, make sure the washers are installed, and then tighten the screws until all the screws are SNUG. If you tighten too much, the frame tubing will collapse and ruin it. 5. Once everything is tight, turn the frame over and put the caster inserts in the legs. These are plastic pieces that can hold the caster. Make sure they are all the way in by pressing in as hard as you can. It was out a little ways. I used a hammer and gave 3 of the more stubborn inserts a quick pop, so they sat easily. 6. I put the caster into the inserts. Make sure that the front or side of the lock are where you want to access it. You will have a booger of a time getting them out. Yes - That is why I am telling you this now. It was 7. The drawers should be in the slides. It was easy for mine to slide in without force. I recreated what I read about stuck drawers, hard to operate, cocked in the tracks, and cutting the plastic by putting the spacers/Washers in initially. The problem was solved after I performed a self-induced slap forehead procedure and backed the frame screws out one by one. There are 8. Put the top on after you tighten everything up again. It has curved sides front and rear. I put the front of the top in position, then pulled the rear of the top and it popped into position for me. The unit is strong. The load specification for the cart is 50 pounds. I will keep things as evenly distributed as possible to equalize loading. I will put a thread lock on the screws if I have any issues with them coming loose. The drawers slide in and out and are in their tracks. It is made of very thin wall metal with chrome coating. I can see how someone handling the edges of the rails for the drawers could cut themselves if they weren't careful. Be careful. After a week or so, I will provide an update on the unit's stability, frame flex, etc., and I will load it up with my wood ship modeling tools. I am okay with the unit. Not impressed by anything, but not disappointed either. I was relieved that my unit came with all the parts, I didn't have to cut my fingers off, and the drawers didn't have to be adjusted. It is in line with my expectations. I will update after a while.

3. Organizer Adjustable Oragnizer Kitchen Counter Included

Organizer Adjustable Oragnizer Kitchen Counter Included

You can easily organize essentials in any room. The pan organizers come with 8 tiers and 6 hooks that are S shaped. The pan rack has a rubber coating on its dividers that prevents kitchen tools from scratching and slipping. You have more options to organize pots with different sizes with the height and position design. The pot lid organizers are easy to assemble in 3 ways. You can either install 8 tiers on one side of the pan rack or 4 tiers on both sides of the pan rack. All the needed accessories and instructions are included in this cabinet organizer. Once you have received the item, you can begin installation. Pot holders for counter cabinet save space. It is a great solution for storing pots and pans, cookie sheets, cutting boards, and other items in a single place. The pot organizer can hold up to 8 pans, which will help the kitchen stay organized. The cookware organizers is made from solid construction and easy to clean. It is very firm and elegant. Solid triangular design is more stable and less likely to fall. The pot lid rack is rustproof. The U shape grooves are able to hold the pot lids in place while being used vertically. The depth of the U shape grooves has been upgraded. The U shape grooves are able to hold the pot lids in place while being used vertically. The depth of the U shape grooves has been upgraded.

Brand: Devan

👤The invention in the kitchen cabinets is the best ever. These items fill up all the space without it. I love it! This is a must have item for every household. The place where you can hang your cooking utensils is even better. I love this set.

👤Don't buy this product. Since I wrote a honest review of the product, this company has been sending me harassing emails. If it stayed together, it could be a perfect product. I intended to use one vertically and the other horizontally on my island for pots and pans. The lightest pans do not stay together when turned vertically. I have to be very careful when placing my pans. The stability of the dividers will be great if the new manufacturer improves it.

👤It works well in my kitchen. They would be next to each other. I had an issue with pulling out cast iron pans. I used the included S hooks to solve the problem. They should be in back but in front for the picture.

👤If you plan to use this as a single sided rack, it is only for very lightweight items. I tried to set the pots and pans up vertically. I put a pot on the bottom rung, but when I put a pan on the next tier, it collapsed. If you have the space, you can put rungs on both sides, but you can't put heavy items on it. I used it horizontally and it worked out, but it was not how I wanted to use it. It slides around easily because it doesn't have a rubber footing. The instructions are in a foreign language. If you have lightweight pots and pans, this is ok, but if you don't, get something more rugged.

👤This thing is great. It's very sturdy and totally changeable. I have it with me, it holds up 2 full sized le crusets, plus 3 sauce pans and lids. I spent years picking up and moving pots because I didn't buy it sooner.

👤It was easy to assemble and you can adjust it to what you need. I put my cast iron pans on the bottom because I didn't want them to warp the higher holders. It seems very sturdy and I love that it gives me organization.

👤It is easy to assemble. All kinds of pots and pans can be adjusted. The use of vertical means that cookware is easy to access.

👤I have exposed pots and pans in my small kitchen. The whole look of my kitchen has been changed by this organizer. It looks like a Cook's kitchen now. Every pot and pan has a home. So happy to have found this.

4. Adjustable Compartments Organizer Holder Chrome

Adjustable Compartments Organizer Holder Chrome

A special deep U-shaped grooves hold the lid in place when this pot holder is used as a lid holder. The small pans/pots are stable in the tier because of the deep U shape. You can store up to seven pans and pots. Installation is easy, no hardware. Pick the way you want to use the rack. The steel construction has an elegant chrome finish. It's great for Cast Iron Skillet. The dimensions are 9.75'' D x 8.8'' W x 17'' H and the compartment is adjusted to fit the dimensions.

Brand: Simple Houseware

👤I picked this one because I love it. It's perfect for the single cabinet in the RV next to the stove. I can have my pans neat, sturdy, and in one cabinet with space left, and it's not necessary for us based on heavy cast iron preference. Exceeded my expectations. I don't receive a thing for this, a tester, a discount, or a promotion, I just bought it, love it, and hope my review helps others like me who were concerned of strength and size for cast iron etc!

👤The product is a great idea, but flawed in design. When twisting the hooks into the slot on one shelf, they broke, and it took some doing. I bought the 7 shelf system so I didn't have to worry about the others. I put my pans on the shelf but they slid forward from the weight. The shelf is not strong enough to hold pans. I use the shelf by putting a pan lid on it, but it's not ideal.

👤It takes up a lot of space. It is the best use of space because I enjoy cooking again and I don't want to dig for the right pans and lids. The assembly was easy and the location was easy to change. You will have to build up some strength, but slowly. I mean very little. I found it to be very sturdy, but you have to put the lightest pans on the top. It seems like a no-brainer. I wish I had rearranged my kitchen space a long time ago.

👤This thing is perfect. I had to figure out how to put it together. There are 3 large pans and 2 skillets. It's on its own. Would definitely recommend.

👤I was looking for a pizza rack that would allow me to stack more pizzas than I already have. I could not find any pizza rack that was less than $35. I saw this item and thought it could work. I was able to put seven pizzas in this structure. We are using it to organize our kitchen island now that we're done. I know what to do to keep the pizza party organized.

👤I needed a more efficient way to store our baking dish. I might add some felt to the rails to cushion the dishes, but I love how this cleaned up the shelf in our kitchen. I'll be ordering two more metal pans for the shelf that's been wrangled. The second unit arrived and now the metal pans are managed.

👤I was able to put this together in a few minutes. I recently moved into a house that was too large for me. I ordered this pan holder along with a competitor's pan holder to compare and contrast. The other one required no assembly and was a bit less expensive. I am happy with this purchase. I was able to layer my pans in one compartment after removing one of the dividers. I paid more for this one. I like it because it is sturdy and the dividers are interchangeable, which makes the compartments more flexible for each kitchen's needs. Nothing slides out when it is not tipping over. I am dealing with the competitor's holder. This was a better purchase than the lower priced one and I am more satisfied with this one.

5. YouCopia StoreMore Adjustable Bakeware Organizer

YouCopia StoreMore Adjustable Bakeware Organizer

The patent is called USD830781S1. Pans, platter, and cutting boards are not included in the lower cabinet or pantry. The additional Store More bakeware wire dividers are sold separately. One minute set-up, no tools required, and strong coated steel wires fit securely into base. The base should be placed on a flat surface. The wire divider should be put into an open slot on the base. The open slot on the opposite side of the base is where you can squeeze the other end of the divider. To lock in place, release. Place the dividers as necessary to fit your items. They recommend that the dividers be close to each other to keep them upright and easy to remove. The round pans stay centered in the base with soft non-slip feet. There is no installation or mounting required for this cabinet organizer. Measures 7.3" x 11.5" The weight is 1.2lb.

Brand: Youcopia

👤I bought a second one after loving it so much. It works great for circular pans, 9x13 cake pans, heavier pans, jelly roll pans, awkward collapsible colanders, cutting boards, whatever you want. Non-skid feet are a big plus. I have a cabinet that I bought a year ago for my slim cabinet next to my oven, but if you have the space, you can get the YouCopia one. The metal dividers fit a bit better over the Copco, and it's nice to have the accommodation of circular pans/lids.

👤I don't know why I didn't do it earlier. The lid organizers are very good. If you stack the lids sideways and the drawer is long enough, you can use two in a drawer. The base is solid and has rubber on the bottom so it doesn't slide, and the wires are plastic coated so they don't scratch glass lids. The wire holders can be put in different spots on the base to make the lid gap different. I can put my oven mitt in the drawer, but I need the exact lid. I am very happy with this product.

👤I have a collection of Nordic Ware novelty baking pans that I use to make small cakes in the form of cars, bugs, cottages, maple leaves and so on. These pans can't be nested inside each other because they're all different shapes, they can't be stacked because they aren't flat, and they can't be stored in their original boxes because they come without a box. Their weight distribution is so skewed that standing them on edge and supporting them against each other is a precarious solution. I had to get all of them out of the open cardboard box in order to reach those at the back. It was not great. I realized I needed a rack, but not just any rack, because of the weird shapes of these pans. I needed something to adjust. I needed a bakeware rack for my pans and this is what I found. It was easy to set up. I took it out of the box and put a pan after each one so I could figure out where the next one would go. I can make the space fit the dimensions of the pan very closely because the holes for the spacers are close together. The wire and base are strong. The little non-skid feet on the bottom help keep the rack in place as I pull heavy pans out. My pans are neatly organized side by side. They are easy to remove. My pans are held up by the wire spacers and stand straight up against each other. This rack is great for novelty bakeware. I ordered another one for my more conventional bakeware because I liked this storage rack so much. I put the pans together and put them in a slot on the rack to make use of the space. I am happy to report that this rack works well for conventional bakeware as well.

6. Copco 2555 0187 Non Skid Cabinet Turntable

Copco 2555 0187 Non Skid Cabinet Turntable

The product is 36 x 14 x 54 inches. Every space in your home should be organized. It's perfect for organizing your kitchen, refrigerator, craft or hobby room or bathroom cabinets. The non-skid surface on turntables is easy to clean and will not cause your items to fall off. Rimmed edge. A rim that is 3/8" is needed to prevent items from falling off. Revolving crime: The pantry lazy Susan has a revolving storage space that maximizes cabinet space and keeps the kitchen organized and tidy. When assembled, the measures are 12 x 12 x 7.5 inches.

Brand: Copco

👤This sturdy lazy susan performed well even with 8 vegetable & fruit cans and one extra large can in the center on each level. No tools, easily assembled. The Rubbermaid FG1A7109 Twin Turntable was ordered by me. The picture was better at the same time. The rubbermaid lazy susan is wobbly and flimsy. It's not heavy enough and slips on the counter when it turns, and I didn't assemble it correctly, but I did pick it up and move it. It was disappointing since I hadn't put anything on it yet. I wouldn't do it because it's only suitable for spices. Just a coupla clicks and my card was reimbursed with a message telling me not to bother returning it, I was very impressed with Amazon's return of it. I have no affiliation with Copco. I immediately ordered another Copco 2-tier turntable and will be looking at their other products as well. I was happy to make the comparison.

👤It works well as described, is good value and assembles in a snap. I'm writing a review because I was not happy with the size. I have purchased the same size Copco turntables before and they fit my cabinet perfectly, maximizing every inch. The model has a small lip around the edge that makes it too deep and my cabinet doors won't close all the way. I used my pantry for cans and they worked well there. I'll be happy with the purchase, but will need to find something different for my cabinet. I attached a picture to show the new turntable with lip, my old Copco turntable with smooth edge, and my installation in my pantry, which all worked well. Don't take the pictures with a mess.

👤I bought this product after reading a lot of positive reviews, but I was disappointed in it. The plastic is cheap and easy to put together. The turntable is made up of two circles and 3 poles. The plastic on the bottom of the pole broke when I put it in. The product is still functional despite being frustrating. The poles went in without any problems. I turned it and felt that it wasn't easy as I would expect with a lazy susan. It made a noise when I turned it on, not something I would expect from a lazy susan. I think it's still functional, but I don't think it's good, and if it hadn't broken when I assembled it, I probably would have returned it.

👤A mess of a cabinet was turned into an organized cabinet by this. It was always difficult to find the right spices. I spin to find what I want. It allows for different size bottles to be placed on the rack. It is very easy to assemble, however one of the sticks/rods did not fully snap in, so it is slightly crooked but still functional. This is a good purchase to help with organization.

👤It's the same as Rubbermaid. Will not return and would not recommend it either.

7. Simple Trending Organizer Aluminum Cleaning

Simple Trending Organizer Aluminum Cleaning

If you want to give your kitchen an upgrade, you should stack your cookware on this rack, eliminate countertop clutter and get all your cookware within each reach as you cook. Storage for cutting board, cookie and baking sheets, kitchen wrap, cleaning products and bathroom supplies in the kitchen or bathroom. It's easy to install on closets or cabinet doors. Eliminate cramped closets without taking up more space. There are wall anchors and mounting hardware. No need to worry about the loud clattering when you open and close your cabinet door because the flat handle makes the organizers maximally attach with the door. It comes with extra soft sticky pads on the hooks so you can fill up the gap if your cabinet door isn't wide enough and also make sure the organizers don't damage the top of your cabinet door. Heavy cutting board, bakeware or other items can be placed in it without bending. Platinum paint enhances protection against rust. Please measure before making a purchase to see the dimensions of the basket. The hooks on the handle are thick enough to fit in a cabinet door.

Brand: Simple Trending

👤The instructions are not very clear on how to attach the hook to the basket. I made a video.

👤I live in a micro flat and always look for ways to make storage more efficient. The hooks that are supposed to clip over the cabinet doors didn't allow my cabinets to close as I wanted. This product is also covered by that. The hanging portion of the product can be removed, leaving just the storage compartment to mount on inside the cabinet door.

👤I like the look of it. It only fits my big cabinet doors. I have 4 other things that don't fit. Unless you drill some screws, the cabinet will bounce from the door all the time. The screws they sent were too long.

👤I wanted to hang them behind the kitchen cabinets, but my husband didn't like it so I put them on the wall in the pantry. They fit a lot. They are easy to assemble. Very happy with them.

👤The only problem I have is that cutting boards fall out of them. I had to make my own base so that they wouldn't fall out. They are tall enough to fit on my longest cutting board. I bought the other one to use for my foil and saran wrap, but the gaps in the front are too big, so they fall out. It's okay to purchase.

👤I didn't like having to assemble them. There was no way to attach the hook to the basket because of the screw hole in the hook brackets. The screw that was provided was small enough to go through the hook hole, but not through the basket hole. I tried to secure them with a zip tie, but I don't like it very much. The hook part of my cabinets is a bit thick. I wouldn't buy this again.

👤I bought a hanging door basket to hold my cutting boards and cookie sheets. The first problem I found was that it had to be assembled. There are screws to attach it together. The entire basket is flimsy because some of the screws don't fit the threads of the holes. After putting the basket together, I put my smaller cutting boards in the basket. There are gaps at the bottom where the sides meet the bottom pieces because the pieces are not welded together. I can put something at the bottom. Trying not to be too picky. I tried to add my cookie sheets. The arms that allow you to hang the basket on the door of the cabinet are too short to open and close the door. The screws are too long to fit into a cabinet door. Completely frustrating.

👤I love this product. I moved in to a smaller apartment with a smaller kitchen and this product has given me more space. I was able to fit all of my cutting boards and food storage products in the organizers which freed up a lot of drawer space.

👤Debi darle otro uso, ha perfecto.

8. Pot Organizers G TING Organizer Adjustable

Pot Organizers G TING Organizer Adjustable

Give the gift of reliability and convenience at any time of the year with this amazing pan organizers designed to create space in any kitchen for better living. You can install the pan organizer according to the size of your pots and pans with the 8 tiered pan rack organizers. Even if your pot is big, it can fit into your pot organizers. This kitchen rack has 3 do it yourself methods. You can either install 8 tiers at both sides or just 4 tiers at one side. The pot rack can be placed in a variety of ways. It's up to you to lay it down or stand it. A kitchen counter organizer is perfect for kitchen organization and storage. How easy is it to install this pot organizer? A kid can install a pot holder in a few minutes. The box has all the essential parts of the pantry organize. Extra tools are not needed. This cookware organizer is made with heavy duty iron and black spray painting. It is very firm and elegant. Solid triangular design is more stable and less likely to fall. Pot lid rack is not easy to rust. While pot holder is being used as lid holder, the U shape grooves design with non- slip silicone pad of the pot lid rack is able to hold the pot lid in place. The load bearing is 9 LB. There may be an error of 1-2 cm and an error of 0.1-0.5 lbs. While pot holder is being used as lid holder, the U shape grooves design with non- slip silicone pad of the pot lid rack is able to hold the pot lid in place. The load bearing is 9 LB. There may be an error of 1-2 cm and an error of 0.1-0.5 lbs.

Brand: G-ting

👤The kitchen is a disaster and I refuse to cook in it. The set up doesn't make sense because the cabinets are too small. There isn't much storage space and everything is a mess. It's been the last area to be conquered. Don't judge the pics, I am posting my shame for you. I had a few days off to figure out what to do, and then I started looking for a pan organizers. When I saw this piece of magic, I had something else in my cart. It arrived quickly, who doesn't have Prime? Just squeeze the brackets together and it pops out. If you want your pots to slide in and out perfect, you need to put the smaller feet closer to the bottom and have your pots ready to place as you build. I put the 2 bottom brackets first, put the wee bitty cabinet next to it, and tested my largest pans on the bottom to make sure it closed properly. I put a couple on a few brackets after pulling it out, but I have more pots than brackets. I have a dozen or so pans, weird, because I haven't seen more than 2 in a year. I made dinner at home for the first time after my pan disaster. This is helpful. If you are boycotting meals until your kitchen is renovated, you may not want to buy anything.

👤I received this in the mail and spent some time on the kitchen floor trying to find a way to make it more than just a 6 pot lid holder. As I looked at the diagrams and pictures, it hit me that the instruction photos were just as bad as the diagrams. The unit is not safe to hold 2 heavy pans. The racks start to fall. I tried my Viking wear pots and Cuisinart and they wouldn't hold horizontal. In counting the slots on my unit, I found that it came with 18 slots, barely enough for a few frying pans and lids. There are about 30 slots in the advertisements and instructions. Did you get that one? I bought a standard unit, but the advertisements have more than that. Shame on you, seller. Two more pot rack organizers were delivered to me, but from a different seller, and for a third less cost. They are almost exactly the same in size, dimensions, number of racks, and cheap overseas made quality. The other two aren't any better than the other two and they were supposed to be able to hold large pots. The pot rack prices under $30 bucks are not solid. If you don't have enough space in your cupboards, this unit won't fit in all directions, only two, and that limits the kind and number of pots it can hold. I bought them and need to incorporate them into my cupboards. You don't have to. I would suggest a hard look at the dimensions, blow up the pictures and take a better look at the product, figure closely the space the unit will take up, and then accept you may have to pay above. I thought the unit would hold 4 pots vertically and the weight would kill the rack at 3 or less average size pots. You only get 18 or so slots, not the 30 pictured. Can't recommend anything here except to look for another product.

9. Updated Organizer Cabinet Adjustable ORDORA

Updated Organizer Cabinet Adjustable ORDORA

No tools, mounting or installation are required. The pot and pan organizers for the cabinet can be adjusted to keep their balance, and the U-turn part provides a better footing for smaller kitchen tools, so that you won't have to worry about them sliding off. Excellent pots and pans organizer rack under cabinet is easy and fast to assemble in 3 ways: vertical on both sides, vertical on one side, and horizontal on one side. It's easy to install the dividers into the slots of the rack. The pot rack is made of heavy-duty iron and is easy to clean. Adjustable 8 Tiers Fit All Pans/PotsORDORA pot and pan organizer is great for every pan, pot in your cookware collection, large or small; you can easily adjust the tiers to accommodate 8 or more. If you want to give your kitchen an upgrade, you should stack your cookware on this rack, eliminate countertop clutter and get all your cookware within each reach as you cook. If you want to give your kitchen an upgrade, you should stack your cookware on this rack, eliminate countertop clutter and get all your cookware within each reach as you cook.

Brand: Ordora

👤There are no dimensions given to me. In the User Instructions as well! Their website didn't help in regards to dimensions. I took a chance. Nope! It wasn't in the largest cabinet. You know, the one by the stove that is supposed to hold pots and pans. I'm here to help you. The Main Frame is 16 and 5 1/2 inches. If you use the Main Frame vertically, you will need 21 and 9/16 inches. The pots and pans are not included. The rack of pots and pans is not shown in the drawing. I put a photo of our pots and pans in the rack so that you can see how much space is needed for a full rack. I put it on top of the KALLAX shelving unit. The supports are dipped in vinyl. I am happy with it even though it didn't fit where I wanted it to. Excellent quality and flexibility in use. I can use it with another person. The main frame would be horizontal at the bottom. Cookie sheets, cutting boards, and lids would make good homes there.

👤This is an organizers dream! It is easy to assemble. We can help you organize your pots and pans.

👤This wasn't the one we wanted for us. The metal pieces seem well made, with a protective plastic coating over the metal ends that will come in contact with your pots and pans. It is incredibly unstable, as you remove and replace items. The plastic coating to protect your pans is problematic because it doesn't allow items to slide in and out easily, and the small pieces of metal that hold the shelves in place cause the rack to collapse. We tried for two days to figure out a way to make it work, but every time we pulled a pan or went to replace a shelf the rack collapsed. The current design of the rack is not usable.

👤It holds my cast iron well. Save space by displaying Them. I can use my art on a daily basis. The farm house is in my house decor. I have several cast iron and dutch ovens. It's hard to store when you don't have a lot of space. If you have wide deep lower cabnets, this is a great solution because it is easy to hide and display. You don't have to pull all your cookwear out to get what you need.

👤The kitchen has a limited amount of cabinet space. Our pots and pans cabinet is just one large open space, so all of our pots and pans are stacked on top of each other. I saw this rack and knew it would resolve our issue. All of our pots and pans fit together very well. The space in the cabinet was increased.

👤Would definitely recommend. This storage rack is very versatile because of the great options for set-up. It's a little shaky but not enough to deter use or purchase. Smaller pots and lids can be placed to one side of the loops or the other, but not as a deterrent, as the loop design claims. The function and ease of getting pots and pans in and out is something we are happy with.

10. YouCopia 50157 Store Adjustable Large

YouCopia 50157 Store Adjustable Large

Measures 9-1/4" Made from durable plastic and steel wires, the wipes have a damp cloth Imported white The perfect fit is created by the dividers. 10 steel wire dividers will not pop out or scratch pans. Soft, non-slip feet keep everything in place. The round pans and lids are centered. No tools, mounting or installation are required.

Brand: Youcopia

👤I bought a second one after loving it so much. It works great for circular pans, 9x13 cake pans, heavier pans, jelly roll pans, awkward collapsible colanders, cutting boards, whatever you want. Non-skid feet are a big plus. I have a cabinet that I bought a year ago for my slim cabinet next to my oven, but if you have the space, you can get the YouCopia one. The metal dividers fit a bit better over the Copco, and it's nice to have the accommodation of circular pans/lids.

👤I don't know why I didn't do it earlier. The lid organizers are very good. If you stack the lids sideways and the drawer is long enough, you can use two in a drawer. The base is solid and has rubber on the bottom so it doesn't slide, and the wires are plastic coated so they don't scratch glass lids. The wire holders can be put in different spots on the base to make the lid gap different. I can put my oven mitt in the drawer, but I need the exact lid. I am very happy with this product.

👤I have a collection of Nordic Ware novelty baking pans that I use to make small cakes in the form of cars, bugs, cottages, maple leaves and so on. These pans can't be nested inside each other because they're all different shapes, they can't be stacked because they aren't flat, and they can't be stored in their original boxes because they come without a box. Their weight distribution is so skewed that standing them on edge and supporting them against each other is a precarious solution. I had to get all of them out of the open cardboard box in order to reach those at the back. It was not great. I realized I needed a rack, but not just any rack, because of the weird shapes of these pans. I needed something to adjust. I needed a bakeware rack for my pans and this is what I found. It was easy to set up. I took it out of the box and put a pan after each one so I could figure out where the next one would go. I can make the space fit the dimensions of the pan very closely because the holes for the spacers are close together. The wire and base are strong. The little non-skid feet on the bottom help keep the rack in place as I pull heavy pans out. My pans are neatly organized side by side. They are easy to remove. My pans are held up by the wire spacers and stand straight up against each other. This rack is great for novelty bakeware. I ordered another one for my more conventional bakeware because I liked this storage rack so much. I put the pans together and put them in a slot on the rack to make use of the space. I am happy to report that this rack works well for conventional bakeware as well.

11. WINKINE Acrylic Cupcakes Organizer Countertops

WINKINE Acrylic Cupcakes Organizer Countertops

There is a fourth step. Most customers put their collections on the table as the fourth step and they want to produce a 4 tier display riser for this. The depth of the 4 tier display stand cannot be held by some Ikea cabinets. The latest version was designed by them. You can choose whether you need the fourth step or not. If you pick up the entire display stand, the fourth step will slip off. There is no need for shears. When people use a screwdriver to install 2 legs with a acrylic panel, the legs will have cracks in them because of the pressure, and they have to use a screwdriver to install the items. WINKINE has improved the design, it only needs to be screwed in by hands to complete the assembly. STURDY DESIGN Their Risers for displays are made of high-definition Acrylic with polished edges and no cheap plastic. The WINKINE stand is more stable and solid than other stands. It's been used. You can use your counter space more efficiently with the help of a display stand. The clear display riser is an ideal place to display toy figurines in cabinets, celebrate party desserts, and display cosmetics on the dresser. The raised tiers help to create an eye catching feature of your items, such as collections, nail polish, perfume and more. Good condition package. The stands are wrapped in a bubble film to prevent them from scratching. A cleaning fabric is used to keep the display riser transparent.

Brand: Winkine

👤The 3 pack of the 9x6 was ordered by me. I got them to hold my perfumes and it worked out. Even after setting all the bottles on it, they feel sturdy. They were easy to put together and I like how it looks.

👤It works perfectly in my Ikea shelf and is a lot cheaper than the others I was looking at. It's perfect for action figures.

👤It was easy to assemble. The legs are loose even though I make the screws tight. I would like it to be a little longer. One of the bottles hangs off the edge. It gets the job done. I have a lot of stuff.

👤An otherwise very good product, and this feature does not diminish the overall value, but the optional addition of the bottom shelf has an issue. The tabs on the vertical piece are not large enough for the slots on the horizontal shelf. The first time I tried to put one in, the horizontal piece broke off, just the thin piece on the edge, so there was no damage to the main portion of the shelf. This was the same on all of the others. I had to use a file on the horizontal piece to make the opening bigger. The rating is average since it is easy to assemble. The display for my action figures is attractive.

👤I picked this stand up as an alternative to the NIUBEE 4-tier stand I had previously purchased, as the fourth step on the competitor's product seemed to be more of a hindrance than a help. The fourth step on the WINKINE stand is a great idea that helps with stability while leaving extra space available in the front, which is great when the stand goes into a display case where the extra room in front is easy to use. A microfiber rag is included to help clean the stand, which is crystal clear if a little dirty. The NIUBEE model seems to attract them less than fingerprints. The included legs install without a problem. My NIUBEE stand had a small crack on one step when I received it, but the entire stand survived shipment with no cracks or chips. The WINKINE stand is less stable than the NIUBEE model. Non-slip feet are attached to the bottom of the NIUBEE's fourth step. The WINKINE model's non-slip feet make them less useful, but it would have been nice to have some rubber feet on the bottom of the stand. I'm sure some 3M stick-on pads will get everything nice and stable if it's an issue for you, but it would be a nice upgrade to have on future revisions.

👤This item is very sturdy and easy to assemble, and I was able to screw in the legs with the help of my finger. They gave you an extra screw in case you misplace it. I used it as a display stand for my son's birthday, but I will use it again once the party is over. I loved my purchase.

Summary

What is the best product for cake organizer cabinet?

Cake organizer cabinet products from Youcopia. In this article about cake organizer cabinet you can see why people choose the product. Honey-can-do and Devan are also good brands to look for when you are finding cake organizer cabinet.

What are the best brands for cake organizer cabinet?

Youcopia, Honey-can-do and Devan are some of the best brands that chosen by people for cake organizer cabinet. Find the detail in this article. Simple Houseware, Youcopia and Copco are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com